| Name | softener TR |
| Synonyms | Softener TR |
| Physical and Chemical Properties | Chemical quality This product is a white flick liquid. Non-ionic softener with good dispersibility in water. The pH is neutral. |
| Use | This product is used as a softening agent for fiber and resin finishing. Suitable for silk, cotton, polyester/viscose and other blended fabrics and nylon silk, cotton wool and other fiber fabrics. Can be used with a variety of additives in the same bath. Long-term storage with stratification. It needs to be homogenized. |
This product is not a hazardous material. Store in a cool and dry place, avoiding sunlight and rain.
Add 100kg of stearamide, 37.8kg (37%) of formaldehyde, sleeve, and 16kg (30%) of liquid alkali to the reactor in sequence, and heat them to reflux state under stirring. Conduct hydroxymethylation reaction, and after reaching the endpoint, add a solution composed of 27kg thiourea and 60kg ethanol to the reaction kettle for condensation reaction at reflux temperature. After the reaction is completed, cool down to about 30 ℃, add 1kg of agricultural milk No. 100 and an appropriate amount of water, quickly stir and mix to make the pulp. Finally, the product is sent to a sand mill for grinding.
100 kg stearamide, 37.8kg(37%) formaldehyde and 16kg(30%) liquid alkali are sequentially added to the reaction kettle, and heated to reflux state under stirring. After the reaction reaches the end point, the solution composed of 27 kg thiourea and 60 kg B is added to the reaction kettle, and the condensation reaction is carried out at the reflux temperature. After the reaction is over, cool down to about 30 ℃, add 1 kg of agricultural milk 100 and appropriate amount of water, and quickly stir, mix and beat. Finally, enter the sand mill for sanding to obtain the product.